Bambu Lab

Build Volume(WxDxH): 256 x 256 x 256 mm³*
Shell: Enclosed (Plastic & Glass)
Hot End: All-Metal
Nozzle: 0.4 mm Stainless Steel Included
Max Hot End Temperature: 300 ℃
Nozzle Diameter : 0.4 mm (Included)
0.2 mm, 0.6 mm, 0.8 mm (Optional)
Build Plate Surface Compatibility: Bambu Textured PEI Plate, Bambu Cool Plate, Bambu Engineering Plate, Bambu High Temperature Plate
Max Build Plate Temperature: 100℃
Max Speed of Tool Head: 500 mm/s
Max Acceleration of Tool Head: 20 m/s²
Control Board Fan: Closed Loop Control
Chamber Temperature Regulator Fan: Closed Loop Control
Auxiliary Part Cooling Fan: Closed Loop Control
Air Filter: Activated Carbon Filter
Supported Filament: Ideal: PLA, PETG, TPU, PVA, PET, ABS, ASA
Capable: PA, PC
Chamber Monitoring Camera: Low Rate Camera 1280 x 720/0.5fps
Timelapse Supported
Filament Run Out Sensor: Yes
Physical Dimensions: P1S：389 * 389 * 458 mm³,
P1S Combo Package size 485 × 480 × 585 mm³,
Electrical Requirements: 100-240 VAC, 50/60 Hz, 1000 W @220 V, 350W@110V

Build Dimensions 256 x 256 x 256 mm³
Materials PLA, PETG, TPU, ABS , ASA , PVA, PET, PA and PC
Connectivity Wi-Fi, Bambu-Bus
Technology Fused Filament Fabrication (FFF)
Dimensions 389 x 389 x 458 mm³ (Printer)
Weight (KG) 12.95

CoreXY up to 20000 mm/s² Acceleration
The P1 series inherits the proven kinematics and motion control system of the Bambu Lab Flagship printer. It prints with a top speed of 500 mm/s, the acceleration from zero to 500 mm/s takes just 0.025 seconds.
Vibration Compensation & Pressure Advance
The active vibration compensation (XY) algorithm and pressure advance guarantees extra smoothness and gets you good prints.

Direct-drive Extruder
With the design that the motor is directly connected to the extruder, P1 series has better control on the extrusion and retraction of flexible filaments. Precise and consistent extrusion for smooth and no-blur prints.