H2D Combo Bambu Lab
Build Volume (W*D*H)
Single Nozzle Printing: 325*320*325 mm³
Dual Nozzle Printing: 300*320*325 mm³
Total Volume for Two Nozzles: 350*320*325 mm³
Chassis & Shell: Aluminum, Steel, Plastic and Glass
Laser Safety Windows: Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
Air Assist Pump: Equipped on Laser Edition, normal H2D can upgrade through Laser Upgrade Kit
Physical Dimensions
Physical Dimensions: 492*514*626 mm³
Net Weight: 31 kg
Toolhead: Hotend
All Metal: Extruder Gear
Hardened Steel: Nozzle
Hardened Steel: Max Nozzle Temperature 350 °C
Included Nozzle Diameter: 0.4 mm
Supported Nozzle Diameter: 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Diameter: 1.75 mm
Extruder Motor: Bambu Lab High-precision Permanent Magnet Synchronous Motor
Heatbed
Supported Build Plate Type: Textured PEI Plate, Smooth PEI Plate
Max Heatbed Temperature: 120 ℃
Speed
Max Speed of Toolhead
1000 mm/s
Max Acceleration of Toolhead: 20,000 mm/s²
Max Flow for Hotend (Standard Flow Hotend): 40 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Max Flow for Hotend (Optional High Flow Hotend)
65 mm³/s (Test parameters: 250 mm round model with a single outer wall; Bambu Lab ABS; 280 °C printing temperature)
Chamber Temperature Control: Active Chamber Heating
Supported
Max Temperature: 65 °C
Air Purification: Pre-filter Grade G3
HEPA Filter Grade H12
Activated Carbon Filter Type: Granulated Coconut Shell
Cooling: Part Cooling Fan: Closed Loop Control
Auxiliary Part Cooling Fan: Closed Loop Control
Chamber Heat Circulation Fan: Closed Loop Control
Cooling Fan for Hotend: Closed Loop Control
Main Control Board Fan: Closed Loop Control
Chamber Exhaust Fan: Closed Loop Control
Supported Filament Type: PLA, PETG, TPU, PVA, BVOH, ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced PLA, PETG, PA, PET, PC, ABS, ASA, PPA-CF/GF, PPS, PPS-CF/GF
Supported
Sensor
Live View Camera
Built-in; 1920*1080
Nozzle Camera
Built-in; 1920*1080
BirdsEye Camera
Built-in; 3264*2448 （Equipped with Laser Edition)
Toolhead Camera: Built-in; 1920*1080
Door Sensor: Supported
Filament Run Out Sensor: Supported
Filament Tangle Sensor: Supported
Filament Odometry: Supported with AMS
Power Loss Recovery: Supported
Electrical Requirements
Voltage :100-120 VAC / 200-240 VAC, 50/60 Hz
Max Power* 2200 W@220 V / 1320 W@110 V
10 °C–30 °C
Electronics: Touchscreen
5-inch 720*1280 Touchscreen
Storage: Built-in 8 GB EMMC and USB Port
Control Interface: Touchscreen, mobile App, PC App
Neural Processing Unit: 2 TOPS
Software: Slicer & Software
Bambu Studio, Bambu Suite, Bambu Handy
Supports third-party slicers which export standard G-code, such as Super Slicer, PrusaSlicer and Cura, but certain advanced features may not be supported.
Supported Operating System: MacOS, Windows
Wi-Fi: Operating Frequency
2412-2472 MHz, 5150-5850 MHz (FCC/CE)
2400-2483.5 MHz, 5150-5850 MHz (SRRC)
Wi-Fi Transmitter Power (EIRP): 2.4 GHz: <23 dBm (FCC); <20 dBm (CE/SRRC/MIC)
5 GHz Band1/2: <23 dBm (FCC/CE/SRRC/MIC)
5 GHz Band3: <30 dBm (CE); <24 dBm (FCC)
5 GHz Band4: <23 dBm (FCC/SRRC); <14 dBm (CE)
Wi-Fi Protocol: IEEE 802.11 a/b/g/n
10W & 40W Laser Module
Laser Type: Semiconductor Laser
Laser Wavelength: Engraving Laser: 455 nm ± 5 nm Blue Light
Height Measuring Laser: 850 nm ± 5 nm Infrared Light
Laser Power: 10 W ± 1 W; 40 W ± 2 W
Laser Spot Dimension: 10W: 0.03 mm * 0.14 mm; 40W: 0.14 mm * 0.2 mm
Working Temperature: 0 °C–35 °C
Max Engraving Speed: 10W: 400 mm/s; 40W: 1000 mm/s
Max Cutting Thickness: 10W: 5 mm; 40W: 15mm (Basswood Plywood)
Laser Safety Class for Laser Module: Class 4
Overall Laser Safety Class*: Class 1
Engraving Area: 10W: 310 mm * 270 mm; 40W: 310 mm * 250 mm
XY Positioning Accuracy: < 0.3 mm
Z Height Measuring Method: Micro Lidar
Z Height Measuring Accuracy: ± 0.1 mm
Flame Detection: Supported
Temperature Detection: Supported
Door Sensor: Supported
Laser Module Installation Detection: Supported
Safety Key: Included
Ventilation Pipe Adapter Outer Diameter: 100 mm
Supported Material Type: Wood, rubber, metal sheet, leather, dark acrylic, stone, and more
Cutting Module: Cutting Area 300*285 mm²
Drawing Area 300*255 mm²
Supported Pen Diameter 10.5 mm-12.5 mm
Cutting Mat Type: LightGrip and StrongGrip Cutting Mats
Blade Type: 45°*0.35 mm
Blade Pressure Range: 50 gf-600 gf
Max Cutting Thickness: 0.5 mm
Blade and Pen Recognition: Supported
Cutting Mat Type Detection: Supported
Supported Image Type: Bitmap and Vector Images
Supported Material Type: Paper, vinyl, leather, and more
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.